What you need to know

The best way to keep the sun out of your eyes and improve visibility is to put a windshield banner on your car. Not only does it look good but the material blocks out the sun and reduces glare.

How to install a windshield banner

The first step in installing a windshield banner is to mark the center of the window and the drop distance using a tape measure. This will allow you to eye the placement of the banner and ensure the top seal and bottom seal are both covered.

Next, start laying one half of the banner down on your windshield and work your way towards the side of the window. As you begin to eye up the position of the banner, do your best to create a tight vertical line that will stay in place once you lay the second half down.

Windshield Banners 101: Everything You Need to Know

Once both sides of the banner are laid down, use your squeegee to press as many air bubbles out as possible. This will make the installation process much easier as you wont have to worry about air bubbles pressing into your banner when you cut it down.

Once you have a clean area on your windshield, place the logo decal over it and remove the center tape. This will leave you with two pieces of tape to secure the decal.